제품 세부 사항
VS10xx Evaluation Kit
Supports VS1011, VS1003 and VS1033 in LQFP48
MP3 / MP3+V / Wav playback from MMC / SD
WMA and SP-midi playback when using VS1003 and VS1033
LC-AAC playback when using VS1033
MMC can use FAT-16 and FAT-32
Uses 8051 family host for user interface (AT89C51R02)
One multifunction key for song / volume / bass control
Two LEDs and display for output
Software of 8051 can be modified via UART
Record plugin available for VS1003 and VS1033
4.7 ADPCM Recording (VS1002/VS1003/VS1023) Player. Refer ADPCM recdoring menu. The recording starts as the controller is tilted right in the “Record?” menu. Recordig stops when the controller is pushed. After recording playback starts automaticly from the firts song. Recorded files are saved to MMC with the name “RECxxxxxx.wav” where x’s are replace with a running number. Note: ADPCM recoding with VS1002 is not currently supported in VLSI Modular Player. Refer 5.1.1 Microphone Rev. C25 and C23. They have been retrofitted to the boards by VLSI Solution. Boards older than 1.15 lack some microphone components and audio quality may be non-perfect on these boards (different kinds of noise can be heard). To get good audio quality, remove R12 and R13 and connect R12A, R12B, R13A, R13B, C25 and C23 as shown in these schematics. New VS1002/VS1003 boards all have microphone and other required components fitted. 5.1.2 Serial Eeprom Evaluation boards do not contain U2, JP2 and R26 (U2, R22 and R15 in boards from version 2.5) These components are for special test purposes only. For more info on SPI-boot refer to the Prototyping board at: http://www.vlsi.fi/player vs10xx proto/player.shtml 5.1.3 DC connector The DC connector is meant only for recharging the batteries. This feature is currently not implemeted in our software. Rev. |